Product name: Planetary Ball Mill

Planetary ball mill is a necessary device for mixing, fine grinding, sample preparation, nano material dispersion, new product development and small batch production of high-tech materials. The product is small in size, full-featured, high-efficiency, and low-noise. It is an ideal equipment for scientific research units, universities, and corporate laboratories to obtain microparticle research samples (four samples can be obtained at the same time for each experiment), and it is equipped with a vacuum ball mill Cans can be used to grind samples under vacuum. It is widely used in geology, minerals, metallurgy, electronics, building materials, ceramics, chemicals, light industry, medicine, beauty, environmental protection and other departments. The rotation speed, the alternating time of forward and reverse rotation, and the total grinding time can be set according to the process requirements.

* The ball milling tank adopts planetary motion, with high ball milling efficiency and fine particle size;

* Frequency conversion control, the ideal speed can be selected according to the test results;

* The inverter has under-voltage and over-current protection, which can protect the motor as necessary;

* The whole unit has timing shutdown, automatic timing forward and reverse functions, and can freely choose one-way, alternate, continuous, timing and irregular operation modes as needed to improve the grinding efficiency;

* Four samples of different sizes and materials can be obtained simultaneously in one experiment;

* Low center of gravity, stable performance, compact structure, convenient operation, safe and reliable, low noise, no pollution, and low loss;

* The equipment is equipped with a safety switch, which can prevent the equipment from starting when the safety cover is opened to avoid safety accidents;

*Grinding tank volume: 100mL*4

*Maximum filling per tank: materials and grinding media do not exceed two-thirds of the volume

*Inlet size: crispy materials less than 10 mm, others less than 3 mm

*Discharge size: the smallest can be 0.1 micron

*Speed: revolution 50-400r/min, rotation 100-800 r/min

*Speed ratio: (revolution: rotation) 1:2

*Speed regulation method: brand inverter stepless speed regulation, speed accuracy 0.2 rpm

*Working mode: two or four tanks work at the same time

*Maximum continuous working time: 72 hours (timer 0-9999h)

*Program-controlled control: The ball mill is controlled by a high-tech microcomputer chip, and it can run forward and reverse alternately (1-999min) and forward, pause, reverse, pause, and forward (1-999min) alternately according to the set program. Especially suitable for the needs of cooling or intermittent operation

*Working voltage 220V

*Motor power and frequency conversion power 0.75Kw

*Dimensions: 455×705×555mm